How to Replace the SoftStep Air Damper

How to install air damper holder

  1. You will need to take off the filter compartment with the 4 screws.
  2. Remove the filter compartment from the metal rod
  3. Unscrew the 4 screws on the inside of the can body that holds the holder
  4. Remove the original holder and insert the new holder (when installing the new holder make sure to put the metal rod through the hole)
  5. Screw in all screws

Tips: Cleaning the rust off your can body

  1. Rub the rust area with a little bit of turpentine then clean with soft soapy water.
  2. Wipe WD-40 on the rust spot scrub a little then wipe off with a clean cloth.
  3. To remove from stainless decking material, sprinkle a bit of salt then squeeze a lime over it let site for 2 -3 hours and scrub with a small old brush to remove rust and wash with warm soapy water.
  4. You can use any commercial stainless-steel cleaner.Use lemon juice on the rust spot, let sit for a couple hours, then rub rust off and clean with soapy water.
  5. Mix a paste of baking soda, lemon juice and a squirt of liquid dish-washing detergent.
  6. Put on rust rub in, let sit, then rub off and wash with soapy water.

Parts & Acessories

Product Information

Warranty